Digidim Hevlar 924 User Manual download pdf (Page 11)

Mini Input Unit (444)

Allows the connection of customer speciﬁed switches (latching or momentary), time

clocks or other on/off control devices to be incorporated into a DIGIDIM system

No of Input Channels 4

Cable Length 200mm

Product Dimensions 30mm x 20mm x 10mm

Note: Cable length must not be increased.

Input Unit (440)

Allows the connection of customer speciﬁed switches (latching or momentary), time

clocks or other on/off control devices to be incorporated into a DIGIDIM system.

No of input channels 8

Cable length 50m (max)

Product Dimensions

70mm x 90mm x 58mm

Imagine Input unit (942)

The IMAGINE input unit is an interface designed to allow customer speciﬁed

switches, sensors, timeclocks or other on/off control devices to be incorporated

into an IMAGINE lighting control system. The input unit also accepts inputs from

1-10V analogue devices

No of input channels 4 Volt free inputs

1-10V / Volt free inputs 4 conﬁgurable analogue

Product Dimensions 70mm x 90mm x 58mm

The DIGIDIM Multisensor (312) provides energy saving functions when used

in a DALI system. It contains a light sensor, a passive infra-red presence

detector (PIR) and an infra-red receiver that allows the Multisensor to be

operated by the hand held DIGIDIM remote controller. The PIR enables the

system to detect when a room is occupied and the light sensor measures the

level of ambient light available. The infra-red receiver and DIGIDIM remote

controller allow the room occupants to set the required light levels and to

carry out basic system programming. The multisensor is designed to push ﬁt

into a ceiling or luminaire housing.

Presence detection

Programmable constant light control for maximum energy efﬁciency.

Complete control using the hand held remote.

•

Multisensor

Input Units

1 2 ... 6 7 8 9 10 11 12

No comments

Digidim Hevlar 924 User Manual Page 11